Toilets
Running on, rocking and leaking at the base each have a different fix, from an internal part to a seal to a new bowl. The plumber looks first and then tells you which one applies.
Running toilets, dripping faucets and shower valves that will not shut off can all be repaired or replaced. Tell us which fixture it is when you call, and we connect you with a plumber for it.
Centennial and the cities near it are covered for fixture work, whether the job is a toilet, a faucet, a valve or a disposal.

Running on, rocking and leaking at the base each have a different fix, from an internal part to a seal to a new bowl. The plumber looks first and then tells you which one applies.
Dripping and stiff faucets point to a worn cartridge or washer inside. If the body itself is corroded or cracked, the faucet is replaced instead.
Shower and tub valves that leak at the handle or give uneven heat can need a new cartridge. Access runs through the wall, and the plumber limits the opening to what the repair requires.
Garbage disposals fail by jamming, humming without turning or leaking from the housing. Repair or replacement follows, with the drain and electrical connections made up again afterward.
Under a sink or behind a toilet, a small shutoff valve and a supply line connect the fixture to the wall. When one seizes or leaks, the plumber replaces it along with the fixture so the new one starts with fresh connections.
Centennial’s One-Stop permit classes include a Miscellaneous class for the replacement or repair of plumbing fixtures. Replacing a seized kitchen faucet or a worn toilet is fixture work.
Sinks and tubs that drain badly may need drain cleaning, and a drip that traces to no fixture may be a hidden leak. The start page lists all seven services.
Call us to discuss your current issue and how we can assist you. The call is free and you get a free, personalized estimate with no obligation. We're here to help.
Call (855) 321-3426